Login to LibApps

Standards in the ASU Library: ANSI: ANSI-B 1.1 - 38.1

List of available ANSI (American National Standards Institute) Standards. (For standards issued by another organization, even if approved by ANSI, see the other organization.)

Jump to ...

standards labeled as: 

A:

    AA-AFPA

    AGA-ANS

    ANSI

    ANSLG-ARMA

    AS-AWWA

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

Please note ...

The ASU Library's standards collection is intended for the use of ASU faculty, staff and currently enrolled students. 

Individuals not affliated with ASU who live in the Phoenix metropolitan area are welcome to come to the Noble Science and Engineering Library on the Tempe campus to view the standards.  Items in the collection are not available for checkout or loan to other libraries; because of copyright restrictions, we do not provide photocopies or scanned copies to those unaffiliated with ASU.  

ANSI B

The following ANSI B standards are available in paper copy in the Noble Science & Engineering Library on the Tempe Campus unless noted otherwise. Standards housed in Noble are "Library use only" and are not available for checkout.

B 1.1 1982,1974 (Unified Inch Screw Threads)
B 1.2 1974 (Gages and Gaging for Unified Inch Screw Threads)
B 1.3 1979 (Screw Thread Gaging Systems for Dimensional Acceptability)
B 1.3M 1981 (Screw Thread Gaging Systems for Dimensional Acceptability)
B 1.5 1977,1973 (Acme Screw Threads)
B 1.8 1977  (Stub Acme Screw Threads)
B 1.9 1973 (Buttress Inch Screw Threads)
B 1.13M 1979 (Metric Screw Threads)
B 1.16 1972 (Metric Screw Threads)
B 1.18M 1982 (Metric Screw Threads for Commercial Mechanical Fasteners)
B 1.20.3 1976  (Reaffirmed 2008) (Dryseal Pipe Threads (Inch))
B 1.20.4 1976 
B 1.20.5 1978
B 1.21M 1978 (Metric Screw Threads)
B 3.1 1992 (Rolling Element Bearings- Aircraft Engine, Engine Gearbox, and Accessory Applications)
B 3.2 1992 (Rolling Element Bearings- Aircraft Engine, Engine Gearbox, and Accessory Applications)
B 3.3 1992 (Rolling Element Bearings- Aircraft Engine, Engine Gearbox, and Accessory Applications)
B 3.7 (See AFBMA 1) 
B 3.14 (See AFMBA 20)
B 4.1 1967 (Rolling Element Bearings- Aircraft Engine, Engine Gearbox, and Accessory Applications)
B 4.2 1978 (Preferred Metric Limits and Fits)
B 4.3 1978
B 4.4M 1981 (reaffirmed 1994; includes one page of Errata) (Inspection of Workpieces) also labelled as ASME B4.4M 
B 5.1 1975  (T-Slots, Their Bolts, Nuts, and Tongues)
B 5.8 1972  (Chucks and Chuck Jaws)
B 5.10 1981 (Machine Tapers)
B 5.18 1972 (Spindle Noses and Tool Shanks for Milling Machines)
B 5.25 1978 (Punch and Die Sets)
B 5.25M 1980 (Mounting Dimensions of Lubricating and Coolant Pumps for Machine Tools)
B 5.28 1971 (Machine Tapers)
B 5.32 1977 (Grinding Machines, Surface, Reciprocating Table- Horizontal Spindle)
B 5.32.1 1977 (Grinding Machines, Surface, Reciprocating Table- Vertical Spindle)
B 5.33 1981,1970 (External cylindrical Grinding Machines-Plain)
B 5.37 1970 (External Cylindrical Grinding Machines-Centerless)
B 5.40 1977 (Spindle Noses and Tool Shanks for Horizontal Boring Machines)
B 5.42 1981,1970 (External Cylindrical Grinding Machines- Universal)
B 5.43 1977,1971 (Modular Machine Tool Standards)
B 5.43M 1979 (Modular Machine Tool Standards (Metric))
B 5.44 1971 (Rotary Table Surface Grinding Machines)
B 5.46 1972 (Symbols for Machine Tools Indicator Plates)
B 5.47 1972 (Milling Machine Arbor Assemblies)
B 5.48 1977 (Ball Screws)
B 5.51M 1979 (Preferred SI Units for Machine Tools)
B 5.52M 1980 (Mechanical Power Presses General Purpose Single Point, GAP Type (Metric))
B 5.53M 1982 (Cutter and Tool Grinding Machines)
B 6.9 1977 (Design for Fine-Pitch Wormgearing )

B 6.11 1956 (Inspection of Fine-Pitched Gears)

B 6.14 1976 (American National Standard - Gear Nomenclature (Geometry)  Terms, Definitions, Symbols, and Abbreviations) is filed under AGMA 112.05 1976

B 7.1 1988,1970 (Safety Requirements for the Use, Care, and Protection of Abrasive Wheels)
B 7.5 1990,1983 (Safety Code for the Construction, Use, Care, and Protection of Gasoline-Powered, Hand-Held, Portable, Abrasive Cutting-Off Machines)
B 7.7 1990 (Safety Requirements for Abrading Materials With Coated Abrasives Systems)
B 9.1 1971 (Filed Under ASHRAE 15-70)(Safety Code for Mechanical Refrigeration)
B 11 2008 (General Safety Requirements Common to ANSI B11 Machines)
B 11 TR 1-1993 (Technical Report for Machine Tools: Ergonomic Guidelines for Design, Installation, and Use)
B 11.1 2001, 1988, 1982, 1971 (Safety Requirements for Mechanical Power Presses)
B 11.2 1995, 1982 (Hydraulic Power Presses - Safety Requirements for Construction, Care, and Use)
B 11.3 1982 (Machine Tools - Safety Requirements for Power Press Brakes)
B 11.4 2008, 1993, 1983, 1973 (Machine Tools - Safety Requirements for Shears)
B 11.5 2008, 1988, 1975 (Machine Tools - Iron Workers - Safety Requirements for Construction, Care, and Use)
B 11.6 2007, 1984, 1975 (Safety Requirements for Manual Turning Machines with or without Automatic Control)
B 11.7 2005, 1995, 1985, 1974 (Cold Headers and Cold Formers - Safety Requirements for Construction, Care, and Use)
B 11.8 2007, 1983, 1974 (Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control)
B 11.9 1975 (Safety Requirements for the Construction, Care, and Use of Grinding Machines)
B 11.10 1990, 1983, 1974 (Safety Requirements for Metal Sawing Machines)
B 11.11 1985 (Safety Requirements for Gear and Spline Cutting Machines)
B 11.12 2005, 1996, 1983 (Safety Requirements for Roll Forming & Roll Bending Machines)
B 11.13 1992, 1983, 1975 (Machine Tools Single- and Multiple-Spindle Automatic Bar and Chucking Machines Safety Requirements for Construction, Care and Use)
B 11.14 1996, 1983 (Coil Slitting Machines- Safety Requirements for Construction, Care, and Use)
B 11.15 1984 (Safety Requirements for Pipe, Tube and Shape Bending Machines)
B 11.16 1988 (Safety Requirements for Powder/Metal Compacting Presses)
B 11.17 1996, 1982 (Safety Requirements for Horizontal Hydraulic Extrusion Presses)
B 11.18 2006, 1997, 1992, 1985 (Machine Tools - Safety Requirements for Machines Processing or Slitting Coiled or Non-Coiled Metal)
B 11.19 1990 (Performance Criteria for Safeguarding)
B 11.20 1991 (Safety Requirements for Integrated Manufacturing Systems)
B 11.21 2006, 1997 (Machine Tools-Safety Requirements for Machine Tools Using Lasers for Processing Materials)
B 15.1 2008, 1972 (See also ASME B15.1) (Mechanical Power Transmission Apparatus- Safety Requirements for Construction, Care, and Use)
B 16e 1939
B 16.1 1975 (Cast Iron Pipe Flanges and Flanged Fittings)
B 16.3 1977 (Superseded by ASME B 16.3)(Malleable Iron Threaded Fittings)
B 16.4 1977 (Cast Iron Threaded Fittings)
B 16.5 1981,1977 (Pip Flanges and Flanged Fittings)
B 16.9 1978,1971 (Factory- Made Wrought Steel Butt-Welding Fittings)
B 16.11 1996 (Superseded by ASME  B 16.11) (Forged Fittings, Socket-Welding, and Threaded)
B 16.12 1983,1977 (Cast Iron Threaded Drainage Fittings)
B 16.14 1983,1977(Ferrous Pipe Plugs, Bushings, Locknuts with Pipe Threads)
B 16.18 1984,1978,1972 (Cast Copper Alloy Solder Joint Pressure Fittings)
B 16.20 1973 (Ring Joint Gaskets and Grooves for Steel Pipe Flanges)
B 16.21 1978 (Nonmetallic Flat Gaskets for Pipe Flanges)
B 16.22 1980,1973 (Wrought Copper and Copper Alloy Solder Joint Pressure Fittings)
B 16.23 1984,1976 (Cast Copper Alloy Solder Joint Drainage Fittings DWV)
B 16.24 1979,1971 (Superseded by ASME B 16.24) (Bronze Pipe Flanges and Flanged Fittings)
B 16.25 1997(Filed Under ASME),1979,1972 (Butt-welding Ends)
B 16.26 1983,1975 (Cast Copper Alloy Fittings for Flared Copper Tubes)
B 16.28 1978(Wrought Steel Butt-welding Short Radius Elbows and Returns)
B 16.31 1971(Non-Ferrous Pipe Flanges)
B 16.33 1981,1973(Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 125 psig)
B 16.34 1981(Valves- Flanged and Butt-welding End)
B 16.36 1975(Steel Orifice Flanges)
B 16.36a 1979 (Steel Orifice Flanges)
B 16.37 1980(Hydrostatic Testing of Control Valves)
B 16.38 1978(Large Manually Operated Metallic Gas Valves for Use in Gas  Distribution Systems Operating Whose Pressure does not Exceed 125psig)
B 16.39 1977(Malleable Iron Threaded Pipe Unions)
B 16.41 1983(Functional Qualification Requirements for Power Operated Active Valve Assemblies for Nuclear Power Plants)
B 16.42 1979(Ductile Iron Pipe Flanges and Flanged Fittings)
B 16.43 1982 (Wrought Copper and Copper Alloy Solder Joint Fittings for Sovent Drainage Systems)
B 18.1.1 1972 (Small Solid Rivets)
B18.2.1 1981
Square and Hex Bolts and Screws Inch Series
B 18.1.2 1972 (Large Rivets)
B 18.2.3 1979 (Hex Cap Screws)
B 18.2.3.2M 1979 (Metric Formed Hex Screws)
B18.2.3.3M 1979
(Metric Heavy Hex Screws)
B 18.2.3.4M 1979 (Superseded by ASME B 18.2.3.4M) (Metric Hex Flange Screws)
B 18.2.3.5M 1979 (Metric Hex Bolts)
B 18.2.3.6M 1979 (Metric Heavy Hex Bolts)
B 18.2.3.7M 1979 (Metric Heavy Hex Structural Bolts)
B 18.2.3.8M 1981,1979 (Metric Hex Lag Screws)
B 18.2.4.1M 1979 (Metric Hex Nuts Style 1)
B 18.2.4.2M 1979 (Metric Hex Nuts Style 2)
B 18.2.4.3M 1979 (Metric Slotted Hex Nuts)
B 18.2.4.4M 1982 (  Metric Hex Flange Nuts )
B 18.2.4.5M 1979 (Metric Hex Jam Nuts)
B 18.2.4.6M 1979 (Metric Heavy Hex Nuts)
B 18.3.1 1978 (Superseded by ASME B 18.3.1) (Socket Head Cap Screws)
B 18.3.2M 1979 (Hexagon Keys and Bits)
B 18.3.6M 1979 (Hexagon Socket Set Screws)
B 18.5 1978,1971
B 18.5.2.1M 1981 (Metric Round Head Short Square Neck Bolts)
B 18.6.1 1981,1972 (Wood Screws)
B 18.6.2 1972 (Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws)
B 18.6.3 1972 (Machine Screws and Machine Screw Nuts)
B 18.6.4 1981 (Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws)
B 18.7 1972 (General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps)
B 18.8.1 1972 (Clevis Pins and Cotter Pins)
B 18.8.2 1978 (Taper Pins, Dowel Pins, Straight Pins, Grooved Pins,  and Spring Pins)
B 18.10 2006 (Track Bolts and Nuts)(Shelved under ASME B18.10 2006)
B 18.16.1M 1979 (Mechanical and Performance Requirements for Prevailing- Torque Type Steel Metric Hex Nuts and
Hex Flange Nuts)
B 18.16.2M 1979 (Torque Tension Test Requirements for Prevailing- Torque Type Steel Metric Hex Nuts and Hex Flange Nuts)
B 18.16.3M 1982 (Dimensional Requirements for Prevailing- Torque Type Steel Metric Hex Nuts and Hex Flange Nuts)
B 18.21.1 1972 (Lock Washers)
B 18.22M 1981 (Metric Plain Washers)
B 18.22.1 1965 (Plain Washers)
B 19.3 1981 (Safety Standard for Compressors for Process Industries)
B 24.1 1985,1971 (Forging Machinery- Safety Requirements)
B 27.6 1972 (General Purpose Uniform Cross Section Spiral Retaining Rings)
B 27.7 1977 (General Purpose Tapered and Reduced Cross Section Retaining Rings)
B 27.8M 1978 (General Purpose Metric Tapered and Reduced Cross Section Retaining Rings)
B 28.2 1977 (Safety Requirements for the Construction, Care, and Use of Tire and Tube Curing Presses and Post Cure Inflators)
B 28.3 1979 (Safety Requirements for the Construction, Care, and Use of Tire Building Machines)
B 28.4 1982 (Safety Requirements for the Construction, Care, and Use of Hydraulic Molding and Curing Presses)
B 28.5 1983 (Safety Requirements for the Construction, Care, and Use of Roll-Building Machines Using Full-Face Pressure Rolls)
B 29.2M 1982 (Inverted Tooth (Silent) Chains and Sprockets)
B 29.12 1974 (Steel Bushed Roller-less Chains, Attachments and Sprocket Teeth)
B 29.13 1972 (700 Class Pintle Chains, Attachments, and Sprocket Teeth)
B 29.15 1973 (Heavy Duty Roller Type Conveyor Chains and  Sprocket Teeth)
B 29.16 1974 (Welded Steel Type Mill Chains, Attachments, and Sprocket Teeth)
B 29.16M 1981 (Welded Steel Type Mill Chains, Attachments, and Sprocket Teeth)
B 29.18 1974 (Welded Steel Type Drag Chains, Attachments, and Sprocket Teeth)
B 29.18M 1981 (Welded Steel Type Drag Chains, Attachments, and Sprocket Teeth)
B 29.19 1976 (A and CA550 and 620 Roller Chains, Attachments,  and Sprockets)
B 29.21M 1981 (700 Class Welded Steel and Cast Chains,   Attachments and Sprockets for Water and Sewage Treatment Plants)
B 29.22M 1980 (Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs)
B 29.5 1968 (Attachments for Transmission Roller Chains)
B 30.1 1981,1975 (Jacks)
B 30.2 (see ASME B30.2) 
B 30.4 1981 (Portal, Tower, and Pillar Cranes)
B 30.11 1980,1973 (Monorails and Underhung Cranes)
B 30.12 1975 (Handling Loads Suspended from Rotorcraft)
B 30.13 1977 (Controlled Mechanical Storage Cranes)
B 30.15 1973 (Mobile Hydraulic Cranes)
B 30.16 1981,1973 (Overhead Hoists)
B 30.17 1980 (Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist))
B 30 .21 2005  (Filed Under ASME 30.21 2005)(Manually Lever Operated Hoists)
B 31.1 TR 116 (Operation, Maintenance, Modification, Replacement, and Repair of ANSI b31.1 Power Piping Systems)
B 31.1a 1977 (Superseded by ASME B 31.1a) (Power Piping)
B 31.1b 1978,1973 (Power Piping)
B 31.1c 1978,1973 (Power Piping)
B 31.1d 1974 (Superseded by ASME B 31.1d) (Power Piping)
B 31.1e 1974 (Superseded by ASME B 31.1e) (Power Piping)
B 31.1g 1976 (Power Piping)
B 31.1h 1976 (Power Piping)
B 31.1i 1976 (Power Piping)
B 31.2 1968
B 31.3 1976,1973 (Chemical Plant and Petroleum Refinery Piping)
B 31.4 1974 (Liquid Petroleum Transportation Piping Systems)
B 31.4a 1978,1977,1975,1974,1973,1972,1972 2nd ed (Referenced Standards Addendum )
B 31.5 1974 (Refrigeration Piping)
B 31.5a 1978 (Refrigeration Piping)
B 31.7b 1971 (Nuclear Piping)
B 31.7c 1971 (Nuclear Power Piping)
B 31.8 1975 (Gas Transmission and Distribution Piping Systems)
B 31.8b 1969 (Supplement to Gas Transmission and Distribution Piping Systems )
B 32.4 1977 (Preferred Metric Sizes for Round, Square, and Hexagon Metal Products. )
B 32.4M 1980 (Preferred Metric Sizes for Round, Square, and Hexagon Metal Products.)
B 32.5 1977 (Preferred Metric Sizes Tubular Metal Products Other Than Pipe)
B 38.1 1970 (Methods of Testing for Household Refrigerators Combination Refrigerator –Freezers, and Household Freezers)(Filed Under ASHRAE 13-69)
 

Hours and Locations